Cleanroom walk on ceiling is specialised ceiling system design to maintain control environment and facia cleanroom ceiling is a specialized type of ceiling that is designed to maintain a controlled environment in cleanrooms. Cleanrooms are used in a variety of industries, such as pharmaceuticals, biotechnology, electronics, and healthcare, where it is essential to maintain a sterile and controlled environment.
Cleanroom ceilings are typically made of materials that are easy to clean and do not produce particles, such as aluminium or stainless steel. The ceilings are designed to be flush with the walls to eliminate any gaps or corners where particles could accumulate.
In addition, cleanroom ceilings are equipped with high-efficiency particulate air (HEPA) filters to remove any airborne contaminants from the environment. The filters capture particles as small as 0.3 microns, ensuring that the air in the cleanroom remains free of contaminants.
The design of a cleanroom ceiling is crucial to maintaining the cleanliness of the environment. The ceiling must be properly installed and sealed to prevent any air leaks or particle contamination. The use of a cleanroom ceiling, along with other cleanroom components such as walls, floors, and air handling systems, is essential for creating a sterile and controlled environment for critical operations.
CR/PCGI/PPGI/AL/SS/HPL
GI 0.8mm GPSP (Tata/Posco) or as per requirements
CR/GI/AI/SS sections
PUF/PIR/Rockwool/Honeycomb
Food Grade silicon
Food Grade silicon
1200mm,1000mm,900mm,150mm, Customized
6000 mm
50mm, 60mm, 80mm and 100mm
80 microns Epoxy Powder Coating (Jotun)
Matt finish
As per sample
Wall panels & suspension rods
Can be made as per requirements
Skin Type
CR/PCGI/PPGI/AL/SS/HPL
Sheet Type
GI 0.8mm GPSP (Tata/Posco) or as per requirements
Structural Frame Work
CR/GI/AI/SS sections
Insulation
PUF/PIR/Rockwool/Honeycomb
Connecting Profile
CR/GI/SS profile
Sealant
Food Grade silicon
Panel Width
1200mm , 1000mm , 900mm , 150mm , Customized
Panel Height(max)
6000 mm
Panel thickness
50mm , 60mm , 80mm and 100mm
Coating thickness for CR/GI/AL
80 microns Epoxy Powder Coating (Jotun)
SS
Matt finish
PCGI
As per sample
Riser
Inbuilt
Cut-out
Can be made as per requirements